|
| |
All standard engine parts are
available for Zane Laverdas. The following are examples of standard, and
performance, fitment parts available. However this is not a complete list.
If you cannot see the parts that you are looking for please contact
us, we probably have it in stock.
All prices are exclusive of VAT and shipping, and may be changed without notice.
|
| Oil filter replacement kit
![[Product Image]](images/parts/oil_filter1.JPG)
|
|
Available in plain aluminium, or anodized in red, blue, black, or gold. Each is
finished with a coarse mesh insert, and has industrial o-rings both on the
face, and under the red anodized Goodridge fixing bolt.
Click here for fitting instructions |
Price
Blanking plate: £59.99
Model fitment
- All Zane Era Laverdas (650/668/750)
|
|
Key Benefits
- Improves oil flow
- Cools main bearings
- Reduces risk of bottom end failure
Back To
Top
|
| Gasket Sets
![[Product Image]](images/parts/gasket_set.JPG)
|
|
Water cut gaskets, and industrial grade O-Ring seals The gasket set comes
ready to seal both sides of the main casing, and the rocker box cover.
Head gaskets for all 750 models are available. 650 and 668 gaskets
should be available soon.
650/668 sets limited stock
|
Price
Gasket Set(not head): £64.00
Head Gasket: £31.25
Model fitment
Gasket set
- Laverda 650 (all models)
- Laverda 668 (all models)
- Laverda 750 (all models)
Head Gasket
|
|
Key Benefits
- Top quality material
- CNC water cut
- Keeps oil in
- Keeps dirt out
Back To
Top
|
| Cam Chains
![[Product Image]](images/parts/cam_chains.JPG)
|
|
The Zane Laverda cam chain is a unique pitch and width. And the link is
therefor unique also.
Regina had refused to make any more, but they have been persuaded to
make one last short run.
The Laverda service manual states that cam chains should be replaced
every 15000Km.
|
Price
Cam chain (with link): £65.80
Link on its own: £8.10
Model fitment
- All Zane Era Laverdas (650/668/750)
|
|
Key Benefits
- Stops valves meeting piston
Back To
Top
|
| Cam Follower Bucket&Shim
![[Product Image]](images/parts/cam_and_buckets.JPG)
|
|
Hard, precision ground, buckets. Shims, ground to
the same high level of precision, are available in a range of sizes.
|
Price
Bucket: £16.00
Shims: £3.68
Model fitment
- All Zane Era Laverdas (650/668/750)
|
|
Key Benefits
- Reduces cam wear
- Increases performance
- Reduces risk of burnt valve seats
Back To
Top
|
| Pistons
![[Product Image]](images/parts/pistons_and_parts.JPG)
|
|
Each piston kit comprises a pair of standard compression ratio pistons,
rings, and gudgeon (wrist) pins. Forged as per race bike.
Oversized pistons up to +0.020" are available.
|
Price
Piston kit: £320.00
Model fitment
- All bikes (any make, or model)
|
|
Key Benefits
- Reduced risk of seizure
- Returns original performance
- Lengthens the life of the bike
Back To
Top
|
| 750 Type 3 Crank Shaft Modification
![[Product Image]](images/parts/type3_rebuild_kit.JPG)
|
|
Laverda modified the 750 crank shaft twice while trying to stop the pickup
rotor, used by the crank position sensor, from shearing off.
Only a few type 3 cranks were ever produced, and placed into late
formulas.
We have remanufactured the thicker end, which we will fit to your
existing crank (broken or not). We also machine the clutch casing to take
the modifications, and fit a larger seal over the larger diameter crank.
We also supply the new, smaller diameter, pickup rotor to suit.
|
Price
Crankshaft Mod - £1130.00 complete including rebuild to damaged crank
or
£736.00 parts supplied only.
Model fitment
- All 750cc Zane Era Laverdas (S, Formula, Strike)
|
|
Key Benefits
- Stops the pickup rotor shearing off
- Allows a broken crank to be reused
- Reduces risk of bottom end failure during down change
Back To
Top
|
|
![[Company Logo Image]](images/logos/AltoSmall.gif)
